OUTBACK MX60 is the highest output listed Max Power Point Tracking PV Charge Controller available. Allows configuration of an array to any voltage below 125 Voc (volts open circuit) and for an output voltage from 12 to 60 volts nominal. All the settings are adjustable allowing for use with any battery type. Four line 80 character backlit LCD display is used for programming and monitoring the charge system. The display shows: PV Voltage, Battery Voltage, Amps In, Amps Out, Watts and Cumulative KWH. T he Built-in auxillary output control sytem can be used to control a secondary control circuit, relay or contactor: ie diversion or load control (low battery disconnect). Efficiency is in the high 90’s. Standby power consumption is less than 1 watt typical. With the MATE and HUB, up to 8 MX60’s can be monitored remotely. NEMA 1 enclosure.
Dimensions 14.5”H x 5.75”W x 5.75”D. Weight is 12 lbs. Limited 2 year warranty.
Outback Charge Controllers 
OUTBACK MX60 is the highest output listed Max Power Point Tracking PV Charge Controller available. Allows configuration of an array to any voltage below 125 Voc (volts open circuit) and for an output voltage from 12 to 60 volts nominal. All the settings are adjustable allowing for use with any battery type. Four line 80 character backlit LCD display is used for programming and monitoring the charge system. The display shows: PV Voltage, Battery Voltage, Amps In, Amps Out, Watts and Cumulative KWH. T he Built-in auxillary output control sytem can be used to control a secondary control circuit, relay or contactor: ie diversion or load control (low battery disconnect). Efficiency is in the high 90’s. Standby power consumption is less than 1 watt typical. With the MATE and HUB, up to 8 MX60’s can be monitored remotely. NEMA 1 enclosure. 