Permanent Magnet DC Generator - Magnets: Two high-energy saturated C8 ceramic magnets. - Shaft: Stainless steel 8mm (5/16") diameter, 38mm length, with 1mm full-length flat. - Armature: 16-slot armature 52mm diameter would with AWG25 magnet wire (fusing current:24 amps). - Brushes: Extra-long 8x14mm brush assemblies including spring, pigtail, and cap - replacement stock no. 443729 - Bearings: Two double-sealed 32mm OD ball bearings - replacement stock no. 171110 - Rotation: Either direction - The red or white output wire is positive for clockwise rotation from the shaft end. - Speed: Zero to 5,000 rpm - generates at all speeds - Mounting: Four 6mm holes on the front or rear end caps, or by hose clamps on the magnet drum. - Weight: 1.5Kg (3.3lb) Shipping weight 1.9Kg (4lb), dimensions 150x150x300mm (6x6x12in). - Resistance: Internal resistance 21 ohms. - Inductance 40mH. - Performance: See performance curves below (we will be adding this soon!)
2.5A -10 minute run time 2A - 15 minute run time 1.5A - CONTINUOUS DUTY
1.5A Permanent Magnet DC Generator Low RPM 
Permanent Magnet DC Generator
